Directions for use
All Fix is extremely easy to apply, firstly ensure that surfaces to be bonded are clean, dry and free from any contaminants.

Spray the adhesive in a uniform coating from approximately 25cm (10 inches).

For applications on porous materials, or for maximum strength adhesion, coat both surfaces.

Allow 1-2 minutes for the solvents to evaporate.

Press together firmly, working from the centre outwards to achieve a good bond.


For best results the adhesive should be used at temperatures between 15°C-25°C.

You will get the best performance from your aerosol cans if stored at room temperature prior to use.

Shake cans thoroughly, hold the can horizontally while shaking is the manufacturer's advice.

Mixing the ingredients is paramount to stop splatter and the clogging of nozzles!

Spray Glue 500ml


    Look Around


    Follow Us

    Screen Shot 2018-07-31 at 12.26.50.png
    Screen Shot 2018-07-31 at 12.27.07.png

    ©2018 by Undacover. All Rights Reserved

    • Black Facebook Icon
    • Black Instagram Icon